Loading ...
Loading ...
Loading ...
6 ENGLISH
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
1
2
Fig.3
► 1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Indicator lamps Remaining
capacity
Lighted O Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may dier slightly
from the actual capacity.
NOTE: The rst (far left) indicator lamp will blink when
the battery protection system works.
Setting for desired screw lengths
The tool provides 7 positive-lock screw length settings.
Slide the stopper base out and in while depressing the
levers on the top surface of the stopper base so the
number for desired screw length (indicated on the label)
appears in the reading window. See the following table
for details on the numbers allocated to your desired
screw lengths.
1
2
3
4
Fig.4
► 1. Stopper base 2. Levers 3. Label 4. Reading
window
Numbers indicated on
the label
Screw length ranges
25 25 mm (1″)
30 25 mm - 30 mm (1″ - 1-3/16″)
35 30 mm - 35 mm (1-3/16″ - 1-3/8″)
40 35 mm - 40 mm (1-3/8″ - 1-9/16″)
45 40 mm - 45 mm (1-9/16″ - 1-3/4″)
50 45 mm - 50 mm (1-3/4″ - 2″)
55 50 mm - 55 mm (2″ - 2-3/16″)
Loading ...
Loading ...
Loading ...