Loading ...
Loading ...
Loading ...
4. Adjust the handle to put the product in a comfortable
work position.
5. Tighten the knob fully.
To set the handlebar in transport
position
1. Loosen the knob.
2. Turn the handlebar clockwise until the throttle handle
touches the battery.
3. Turn the handlebar around the shaft.
4. Tighten the knob.
To assemble the cutting equipment
The cutting equipment includes a cutting attachment and
a cutting attachment guard.
WARNING: Use protective gloves.
WARNING: Always use the cutting
attachment guard that is recommended for
the cutting attachment. See
Accessories on
page 29
.
WARNING: An incorrectly attached
cutting attachment can result in injury or
death.
To attach and remove the guard extension
The guard extension is used on the combination guard.
Attach the guard extension when you use a trimmer
head or plastic blades. Remove the extension guard
when you use a grass blade.
1. Put the guide on the guard extension into the slot on
the combination guard. Click the 4 locking hooks into
position.
2. Release the locking hooks with the spark plug
wrench to remove the guard extension.
To attach the grass blade and the grass blade
guard/combination guard
1. Put the blade guard/combination guard (A) onto the
shaft and tighten the bolt to attach it.
A
2. Make sure that the guard extension is removed.
3. Turn the output shaft to align one of the holes in
the drive disc (B) with the related hole in the gear
housing.
4. Put the locking pin (C) in the hole to lock the shaft.
171 - 011 - 05.06.2023
11
Loading ...
Loading ...
Loading ...