Black+Decker HLVC315B01 Instruction Manual

Loading ...

ENGLISH

The label on your tool may include the following symbols. The

symbols and their definitions are asfollows:

V ......................... volts

Hz .......................hertz

min ..................... minutes

or DC ......direct current

...................... Class I Construction

(grounded)

…/min ..............per minute

BPM .................... beats per minute

IPM ..................... impacts per minute

RPM .................... revolutions per

minute

sfpm ................... surface feet per

minute

SPM .................... strokes per minute

A ......................... amperes

W ........................watts

or AC ...........alternating current

or AC/DC .... alternating or direct

current

...................... Class II Construction

(double insulated)

.......................no load speed

n .........................rated speed

......................earthing terminal

.....................safety alert symbol

.....................visible radiation

..................... wear respiratory

protection

..................... wear eye protection

..................... wear hearing

protection

• ANSI Z87.1 eye protection (CAN/CSA Z94.3),

• ANSI S12.6 (S3.19) hearing protection,

• NIOSH/OSHA/MSHA respiratoryprotection.



WARNING:

Some dust created by

power sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to

the State of California to cause cancer, birth defects

or other reproductive harm. Some examples of these

chemicalsare:

• lead from lead‑based paints,

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from

chemically‑treatedlumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to filter

out microscopicparticles.

• Wear protective clothing and wash exposed areas

with soap and water. Allowing dust to get into your

mouth, eyes, or lay on the skin may promote absorption of

harmfulchemicals. Direct particles away from face andbody.

• Use the appropriate dust extractor vacuum to remove

the vast majority of static and airborne dust. Failure

to remove static and airborne dust could contaminate the

working environment or pose an increased health risk to

the operator and those in closeproximity.

• Use clamps or other practical ways to secure and

support the workpiece to a stable platform. Holding

the work by hand or against your body is unstable and may

lead to loss ofcontrol andinjury.

• Air vents often cover moving parts and should be

avoided. Loose clothes, jewelry or long hair can be caught

in movingparts.

Additional Safety Information



WARNING:Never modify the power tool or

any part of it. Damage or personal injury couldresult.



WARNING:ALWAYS use safety glasses.

Everyday eyeglasses are NOT safety glasses. Also use

face or dust mask if cutting operation is dusty. ALWAYS

WEAR CERTIFIED SAFETYEQUIPMENT:

Additional Safety Warnings

a ) Prevent unintentional starting. Ensure the switch

is in the off‑position before picking up or carrying

the appliance. Carrying the appliance with your finger

on the switch or energizing appliance that have the

switch on invitesaccidents.

b ) Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another batterypack.

c ) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

orburns.

d ) Do not use a battery pack or appliance that

is damaged or modified.

Damaged or modified

batteries may exhibit unpredictable behavior resulting

in fire, explosion or risk ofinjury.

e ) Do not expose a battery pack or appliance

to fire or excessive temperature. Exposure to

fire or temperature above 266°F (130°C) may

causeexplosion.

f ) Follow all charging instructions and do not

charge the battery pack or appliance outside

of the temperature range specified in the

instructions. Charging improperly or at

temperatures outside of the specified range may

damage the battery and increase the risk of fire.

g ) Have servicing performed by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the product

ismaintained.

h ) Do not modify or attempt to repair the appliance

or the battery pack except as indicated in the

instructions for use andcare.

discharged from the air vents, especially after cleaning

/ replacement of the filters as debris inside the unit can

bedisturbed.

• Leaks from battery cells can occur under extreme

conditions. If the liquid, which is a 20‑35% solution of

potassium hydroxide, gets on the skin (1) wash quickly with

soap and water or (2) neutralize with a mild acid such as

lemon juice or vinegar. If the liquid gets into the eyes, flush

them immediately with clean water for a minimum of

10minutes. Seek medicalattention.

SAVE THESE INSTRUCTIONS

Loading ...

Black+Decker HLVC315B01 Dustbuster Cordless Hand Vacuum AdvancedClean with Charger, Filter and Brush Crevice Tool

Instruction Manual - Page 7