Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/17592719-vbva1010pf/bge.png)
14
INSTALLING & CLEANING CARTRIDGE
FILTER
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Remove the power head and place in upside down position.
3. Install the cartridge lter over the lter cage making sure the cage is completely covered
(Fig. 2 & 3).
4. Place the lter retainer on top of the cartridge lter over the raised lip and tighten down by
turning retainer clockwise; do not over-tighten (Fig. 4).
5. Place the power head back onto the collection tank.
REMOVING AND CLEANING CARTRIDGE FILTER
1. Unlock and remove the lter retainer by turning retainer handle counter clockwise.
2. Carefully hold and pull the cartridge lter up for removal (Fig. 5).
3. Clean the cartridge lter by gently tapping or brushing dirt off. Cleaning should not be done
indoors in living areas. For optimal performance a new lter is recommended.
4. Install cleaned or new lter into place as instructed above.
5. Wet lters should be removed and allowed to air dry for 24 hours before installing onto the lter.
1 2 3
4 5
INSTALLING & CLEANING THE SUPPLIED CARTRIDGE FILTER
Loading ...
Loading ...
Loading ...