Allen + Roth LWFP58-7 Allen + roth 58-in W Gray TV Stand with Infrared Quartz Electric Fireplace

Operating Manual - Page 5

For LWFP58-7. Also, The document are for others Allen + Roth models: LWFP62-8

PDF File Manual, 20 pages, Read Online | Download pdf file

LWFP58-7 photo
Loading ...
Loading ...
Loading ...
5 Lowes.com/allenandroth
Operation (continued)
Using the heater control
NOTE: The heater default temperature is set to 82 degrees Fahrenheit. If your ambient room temperature is above 82
degrees, then your heater will automatically shut off after few minutes. Set your heater to ALWAYS ON (see below
directions) in order to keep your heater ON above 82 degrees.
Pressing the heater button (4) will turn on or off the heat and set the temperature in the thermostat. If you turn off
the heater by the main power button (6), the unit will hold your preferred temperature setting in the memory. When the
power is turned back on, the heater will turn on at the same setting. There is no speed setting for the heater blower.
To convert from Fahrenheit to Celsius: With the heater on, press and release the heater button (4) so that the
display (1) and LED function indicator (2) lights turn on (if they are not already on). Then gently press and hold the
main power button (6) for five seconds to enter temperature converting mode. The LED indicator flashes five times in
red color then changes to green. Green indicates Celsius mode, and Red indicates Fahrenheit mode. In this converting
mode, the display (1) flashes. Repeat the same process to convert Celsius temperature into Fahrenheit temperature.
To set the thermostat temperature: Press the heater button multiple times to cycle through the temperature
settings, starting at 82°F down to 62°F, then Always OFF or Always ON. (27°C - 17°C - OFF - ON). After you release
the heater button (4), your preferred setting will be flashing. Once it stops flashing, and the display goes dark, then
the thermostat will be set at your preference (and kept in memory). Note that the "ON" setting keeps the heater
always on until the user powers off the unit or the safety sensor turns off the heater to prevent overheating.
To turn OFF the Heater while keeping the Flames ON: Press the heater button multiple times until you see "OF"
in the Control Panel display (1). This indicates the Heater is "OFF". Flame settings and other features continue to
operate as normal.
Heater Lock (safety feature): To lock the heating function in the OFF position, with the main power button on, press
and hold the heater button (4) for at least ten seconds while counting to twenty-five. In this mode, there is no heater
function, but flame control operates normally. To unlock the Heater Lock, follow this same procedure. Then normal
heater mode is tuned back on.
NOTE: After the heater function or power is shutoff the blower will continue to run for several minutes to cool the
internal components.
Using the flame control
Press the flame button (5) to set the flames for different levels of flame brightness. These flame levels are shown
in the display (1). The flames cannot be turned off when the heater function is on. The flame settings are as follows:
Button Press Flame Level Display Value Fireplace Appearance
1st press High L4 Flames Highest
2nd press Medium L3 Flames Medium
3rd press Low L2 Flames Low
4th press Lowest L1 Flames Lowest
5th press Off None Flames Off
Regardless of the previous flame setting, when powered off by the main power button, the flames will come on in
L4 mode (High) when you turn the heater on.
5
1
2
4
6
Loading ...
Loading ...
Loading ...