Allen + Roth LWFP58-7 Allen + roth 58-in W Gray TV Stand with Infrared Quartz Electric Fireplace

Operating Manual - Page 4

For LWFP58-7. Also, The document are for others Allen + Roth models: LWFP62-8

PDF File Manual, 20 pages, Read Online | Download pdf file

LWFP58-7 photo
Loading ...
Loading ...
Loading ...
4 Lowes.com/allenandroth
Operation
Identifying the control panel
Understanding the function indicator
The control panel is located on the bottom right
corner of the fireplace/heater unit.
The control panel contains the display unit (1),
function indicator (2), timer function (3), heater
control (4), flames control (5), and main power (6).
The display unit (1) displays information about the
flame level, timer, and current temperature.
The function indicator (2) has three square LEDs
red, green, and blue. The red LED indicates that the
Fahrenheit temperature heating function is running,
the green LED indicates that the Celsius temperature
heating function is running, and the blue LED
indicates that the timer function is engaged.
To the right of the three LEDs, is the infrared
receiver module which communicates with the
remote control to control the heater.
Using the timer function
The timer button (3) allows you to set the amount of time you want the fireplace/heater to run. The timer button (3)
operates both the flames and the heater function. If the heater is operating when the timer is set, then the heater is
on the timer. If the flames are operating, then the timer will control the flames. If both the heater and flames are
operating with the timer set, then the timer controls both the flames and the heater. Pressing the button in sequence
will set the timer for a set interval. This interval period is shown in the display (1), and the blue LED light turns on to
show that the timer function is engaged. The set intervals are displayed in this table. The timer starts after you select
your preferred interval and release the button; note that the display and blue light will turn off after a few seconds.
There is no clock function for turning the heater or flames on or off at a specific time.
Button Press Timer Interval Display
1st press 30 Minutes 30
2nd press 1 Hour 1h
3rd press 2 Hours 2h
4th press 3 Hours 3h
5th press 4 Hours 4h
6th press 5 Hours 5h
7th press 6 Hours 6h
8th press OFF None
1
2
3
4
5
6
2
1
3
Loading ...
Loading ...
Loading ...