Loading ...
Loading ...
Loading ...
9
BEFORE FIRST USE/INSTALLING YOUR OVEN ACCESSORIES
Preparing your appliance for the first time
• Please remove all internal boxes and bags from the
oven before operation.
• Please wipe out the oven interior prior to operation
with warm soapy water and polish dry with a soft
clean cloth. Do not close the oven door until the oven
is completely dry.
CAUTION
• Do not line the oven with foil as it will damage the
enamel.
• New appliances can have an odour during first use. It
is recommended to ‘run in’ the oven before cooking
for the first time. Operate the oven(s), empty, at a
temperature of 180°C for approximately 30 minutes.
Please ensure that the room is well ventilated during
this process.
Setting the time of day
You have purchased a model fitted with a programmable
controller, you must set the time of day before you can
operate your appliance.
Set the time
Before you can start using the oven, you must set up the
clock.
3. Press to complete the clock setting.
Note: The clock has a 24-hour display.
BEFORE FIRST USE
Slides (Telescopic runners)
1. Obtain left hand side rack and left hand slide – see
image to identify.
2. The shaded wires indicate the wire the slide can be
mounted on. Fit slide rear clips to the rear of wire at
an angle as shown below.
1
2
3. Push slide front clip over wire until secured
CLICK !
3
Side racks
• The side racks attach to each side of your oven.
There is a left hand and right hand version (see image
below for details).
• Insert the rear peg into the rear access hole provided,
ensuring that the peg is fully inserted.
• Then locate the front peg into the front access hole
and push in firmly.
Front Peg Rear Peg
INSTALLING YOUR OVEN
ACCESSORIES
1.After the oven has been electrically connected, ‘00:00’
will be displayed and the hour minute digits will flash.
2.Turn the 'Adjust' knob or to set the time of the
day.
Loading ...
Loading ...
Loading ...