Loading ...
Loading ...
Loading ...
Install the Mounting Plate
Disassemble and remove your existing outdoor light. Position the mounting plate (1) and remove
one of the plastic clips to create an opening for passing the power cable through. Ensure the UP
arrow is pointing upwards and trace the screw holes. Remove the mounting plate (1), drill into
your tracings and insert the supplied wall anchors.
Place the mounting bracket (2) on top of the mounting plate (1) and secure them using
the supplied screws.
Installation
Eve Outdoor Cam requires both a neutral wire and a connection to a ground wire. If
these are not present, Eve Outdoor Cam is not compatible at this location.
You may also use the wall anchors from your existing outdoor light if they’re spaced
as required. In this case, please ensure that the UP arrow is pointed upwards, or
horizontally to the left or right.
1
98
Loading ...
Loading ...
Loading ...