Loading ...
Loading ...
Loading ...
Note:
05
UNPACKING YOUR ICE MAKER
CONNECTING YOUR ICE MAKER
Remove the exterior and interior packaging. Check that the ice basket and ice scoop are included. If
any parts are missing, please contact Customer Service.
Clean the interior with a soft cloth dampened with plain lukewarm water. Take out the ice basket and
scoop, and wash them in warm, soapy water. Then rinse, dry, and re-place the basket and scoop.
Find a location for your ice maker that is out of direct sunlight and away from other sources of heat
(e.g., a stove, furnace, or radiator).
Place the ice maker on a flat, level surface.
Be sure that there is at least 6 inches of space between the back and sides of your ice maker and any
walls.
After unpacking or moving the ice maker, allow 1 hour for the refrigerant fluid to settle before
plugging in the appliance.
The appliance must be positioned so that the plug is accessible.
Improper use of the grounded plug can increase the risk of electrical shock. If the power cord is
damaged, please call Customer Service.
This unit should be properly grounded for your safety. The power cord of this appliance is equipped
with a three-prong plug, which mates with standard three-prong wall outlets to minimize the
possibility
of electric shock.
Plug your appliance into an exclusive, professionally installed, grounded wall outlet. Do not, under
any circumstances, cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed to a certified electrician.
This appliance requires a standard 110–120V, 60Hz electrical outlet with three-prong ground.
Operation & Installation
Fill with potable water only.
Loading ...
Loading ...
Loading ...