Loading ...
Loading ...
Loading ...
Operation & Installation
07
A.Be sure the water tank, water filter, and water separator pipe are not clogged. If they are, clean
them before trying to make more ice.
B.The water temperature will affect the ice-making capacity. The cooler the water, the more ice
cubes produced.
C .The ambient temperature will affect the ice-making capacity. The cooler the ambient temperature,
the more ice cubes produced.
D.Always use good-quality water to help the pump work at optimal efficiency. Bad-quality water will
cause the pump to make noise but will not keep the unit from working.
E . If you turn off the unit, the compressor will restart after 3 minutes.
4.When the Ice Full indicator < > is on, the unit will stop running. Take out the ice cubes and the
unit will start working again.
While the ice maker is running, press and hold the <ON/OFF> button for at least 5 seconds to force
ice harvesting. Press the <ON/OFF> button once to turn off the unit.
There is a timer setting function on the machine. When the machine is working, you can set the
shutdown time at regular intervals. The appointment time would be invalid after shutdown. When the
machine is turned off you can make an appointment to turn on the machine.
Press the <TIMER> button and the display will show <1H>. Press <+> and <-> to set the time. The
“H” will flash while you are adjusting the setting. After 5 seconds of inactivity, the “H” will stay on
and your timer setting will be saved.
5.Water drainage: Remove the water drainage cap the bottom of unit. Then drain out the water. It is
suggested to change the water every 24 hours and clean the unit every 3 days.
TIMER/CLEAN"button on control panel for more than 5 seconds, to enter the self-Cleaning program
need 20minutes.the symbol rotate on display screens, time count down area display 20M.
Canceling the self-cleaning program:
It takes about 20 minutes to complete one self-cleaning cycle. When the cycle ends, the system will
turn off automatically. You can also press the ON/OFF button to force stop the self-cleaning cycle.
Warning:
Automatic self-cleaning program
Loading ...
Loading ...
Loading ...