Loading ...
Loading ...
Loading ...
08
Tips & Maintenance
CLEANING AND MAINTAINING YOUR ICE MAKER
Before using your ice maker, it is strongly recommended to clean it thoroughly.
Take out the ice basket.
Clean the interior with diluted detergent, warm water, and a soft cloth.
Rinse the interior with clean water. Drain out the water through the drainage port by removing the
drain cap on the back and taking out the silicone plug.
The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm
water.
Dry the interior and exterior with a soft cloth.
When the machine will not be used for a long time, open the drain cap to drain water completely out
of the water tank.
After using your ice maker for about 3 days, we suggest that you clean the unit. The water separator
pipe and water filters in particular must be cleaned periodically.
If you don’t hear liquid flowing while the compressor and water pump are running, the water
separator pipe may be clogged. Please turn off the unit. Then remove this pipe down and clean it.
Clean each hole along the pipe wall, as shown in the following picture. After cleaning, reinstall the
water separator pipe in its original orientation, making sure that the right end of the pipe is connected
to the silicone pipe well.
Clean both water tanks with diluted detergent, warm water, and a soft cloth. Use clean water to rinse
the inside of the unit. Drain out the water through the drainage port by removing the drain cap and
plug on the back. Regular cleaning will keep the unit and your ice cubes sanitary, and also help the
unit work normally.
How to completely drain the internal tank and large water tank: The water in the large water tank is
kept out of the drainage port by the water valve. If you want to drain out all the water, please plug on
the unit but do not start it. Then remove the drainage port cap at the back. Wait a few minutes and
then all of the water will flow out.
Water Separator Pipe
Hole
Evaporator
Loading ...
Loading ...
Loading ...