Loading ...
Loading ...
Loading ...
20
Before First Use:
Read all instructions and safety information carefully before first use. Please retain this information
for future reference.
1. Remove the parts from the packaging and lay out on an even surface.
2. Check that all parts are present and that there is no visible sign of damage.
3. Assemble the barbecue as per the assembly instructions. Place the appliance outdoors.
4. Connect the gas hose to the barbecue.
5. Connect the regulator to the hose. Ensure that the Thermostat Regulator is set to the OFF
position.
6. Connect the regulator to the cylinder valve, following the regulator instructions supplied with
the regulator.
7. Turn all of the controls to the ‘OFF’ position before turning on the gas supply to the appliance.
8. Operate the regulator in accordance with the instructions supplied with the regulator.
9. Wash and rinse the grill plate, racks and grease collection tray and dry thoroughly before
replacing.
10. Your appliance is now ready for normal use.
11. Dispose of the packaging in a responsible manner.
Connecting The Gas Cylinder To The Appliance:
• This appliance is only suitable for use with low-pressure propane gas and fitted with the
appropriate low-pressure regulator via a flexible hose.
• The hose should be secured to the regulator and the appliance with hose clips/nuts.
• This barbecue is set to operate a 37mbar regulator with propane gas.
• Use a suitable regulator certified to BSEN 16129: 2013. Please consult your gas dealer for
information regarding a suitable regulator for the gas cylinder.
Testing Gas For Leaks:
• Make 2-3 fluid ounces of leak detecting solution by mixing one part washing up liquid with 3
parts water.
• Ensure the barbecue controls are in the OFF position.
• Ensure the control valve is “OFF”.
• Connect the regulator to the cylinder and ON/OFF valve to the burner, ensure the connections
are secure then turn ON the gas.
• Brush the soapy solution on to the hose and all joints, including gas bottle valve connections,
hose connections, and regulator connections. If there is a leak bubbles appear at the site of the
leak, which must be rectified before use.
• Turn OFF the gas supply at the gas bottle.
• Retighten all joints.
• Retest after fixing the fault. Turn OFF the gas at the cylinder after testing.
• If detected leakage cannot be rectified, do not attempt to cure leakage but consult your gas
dealer.
• If you suspect that the appliance is leaking, turn off the gas supply and have the unit inspected
by a qualified technician.
• Always wipe the mixed solution from all joints and connections after leak testing.
DANGER
FOR YOUR SAFETY:
Never check for leaks with a naked
flame, always use a soapy water
solution. DO NOT smoke when using
gas bottles or testing for leaks.
NOTICE
This appliance should be leakage-
tested before first use and whenever
the cylinder has been reconnected
after filling/ is removed or replaced.
DO NOT use electrical equipment
as these may produce a spark which
could ignite the vapours.
Loading ...
Loading ...
Loading ...