Loading ...
Loading ...
Loading ...
28
SWIMMING POOL HEAT PUMP
Manual
10. Initial Startup
² Before starting the pool heater for the first time, it is important to verify that the
breaker is in the ON position.
² Also make sure that the water circulates freely and that the pool pump is
activated.
² Then, you will need to set the water temperature you desire. The fan will
immediately start. The compressor will start after a 3 to 4-minute delay.
² When the compressor is running, the "heating" indicator located on the right
(see “Service Analyzer Control,” p. 13) should be lit. At initial startup, it is
normal for the unit to run 24 hours a day.
² It is also normal to see water dripping from the holes at the base of the unit. This
is just condensation.
Loading ...
Loading ...
Loading ...