Loading ...
Loading ...
Loading ...
27
SWIMMING POOL HEAT PUMP
Manual
There is water around the unit
While your pool heater is in the
heating mode, a large quantity of
warm and humid air passes over the
evaporator and causes condensation.
It is normal to see condensation
dripping under the heater.
To check if the water really is a leak,
you must stop the heater and leave
the pool pump running for over 5
hours. If water is still coming out of
your heater after this period, then
call your dealer for service.
The heater is running but desired water temperature cannot be
reached.
Heat loss is too much for heater; cover your pool as often as you can.
Evaporator restricted due to improper location
Evaporator is dirty
Clean it by running tap water over
the coil without additional nozzel
attachment. Do not use pressurized
water as it can damage the coil and
void warrantly.
Restricted water flow Adjust water flow
² Important
If your pool heater does not operate for reasons other than those mentioned
above, please contact Consumer Assistance Center to obtain the proper
authorization for the warranty to apply.
Loading ...
Loading ...
Loading ...