Loading ...
Loading ...
Loading ...
Programm#_gtheRemote
Programming the Remote
1_ The remote is a mufti-brand or a universal remote. It can be programmed to operate most remoteocontro[lable devices of
other manufacturers
Note that the remote may not control aH modets of other brands,
1. To find out whether your remote can operate the device without programming, turn on the device such as a VCR and press the
corresponding mode button on the re_te
After that press the POWER button. If the device is turned off then it responds properly and the remote need not to be pro-
grammed. If not, the remote should be programmed to operate the device. The programming procedures are expl_ned below:
2. Pre_ the MENU and MUTE button continuousty at the _me time for 2 seconds, the current selected device button will be illu-
minated,
If you don'_ press any button for 20 seconds, the _ight on the mode button will be _med off, In that case, you have to repeat from
step 2,
3. Enter code numbers using the humor button on the remote by refering the code _le on the following pages. When pressing
the button the light b_inks at a time. ff the device turned off, the programming is successful.
4. Press the MENU button to store the code, After bffnking twice, this code is stored,
5. Test the remote functions to see if the device responds properly. If not, repeat from step 2.
50 Plasma 73,/
Loading ...
Loading ...
Loading ...