Loading ...
Loading ...
Loading ...
External Control Device Setup
Use this function to specify a monitor IO number.
Refer to 'Real Data Mapping', See page 44,
1_ Press the MENU button and then use A iV b_on to select the $1I'I'II.TIPmenu,
2, Press the I_ button and then use & j V b_on to select SET ID_
3. Press the i_ button and then use A / V button to adjust SET _ to ch_se the
desired monitor _D number. The adjustment range of _ ID is 1 _ 99,
4. Press EXIT boron to re_um to TV viewing or pre_ MENU button to return to the
previous menu.
• Baud rate : 9600 bps (UART)
° Data iength: 8 bits
• Parity : None
° Stop bit : 1 bit
• Communication code ASCH code
* Use a crossed (reverse) cable.
COMMAND i COMMAND 2 DATA
(H_xadecimali}
01, Power k a 0 ~ 1
04, Screen Mute k d 0 ~ 1
05 VoJurrre Mute k e 0 ~ 1
0& Volume Contro_ k f 0 ~ 64
07. _trast k
_ Brightness k h 0 ~ 64
09 _or k i 0 _ 64
10._nt k j.................0 ~G4............
!_!:Sh_n_ ........................................................................................................................k:...................................._ 64..............................
12. OSD Select k I 0 -- 1
13, Remote Control Lock _ k m 0 ~ 1
14, Treb_ k r 0 ~ 64
15. Bass k s 0 ~ 64
16. _ance k t 0 ~ 64
17, Cc4or Temperature k u 0 ~ 2
l& ISM Me_od 1 P *(Re_e_Lo_p_46_
2i. Orbiter Pixei _tting i s 1 ~3
* This d_ will_ explained inthis document in detail.
Transmission
I!commaod lICommand ll [SetID][][Data][Cr]I
* [Command 1]: First command to control the set.(j,k,m or x)
* [Command 2]: Second command to cor_tro[ the set.
* [Set ID]: You can adjust the set tD to chec_se desired _nitor
[D number in Setup _nu. Adiustment range is 1
~ 99. When selecting Set ID '0', every connected
the TV is controlled. Set ID is indicated as decima_
(1-99) on menu and as Hexa decimal (OxO_Ox63)
on transmission/reseiving p_tocol.
* [DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
* [Cr]: Carriage Return
ASCII code 'Ox0D _
* [ ]: ASCII code 'sp_se (0x20)'
OK Acknowledgement
The Monitor transmits ACK (acknowledgement) based on
• is format when receiving normal data, At this time, if the
data is data read mode, it indicates present status data. If
the data is deta write mode, it returns the dat_ of the PC
computer,
Erro[ _cknewtedaement
][Command2]il[Set 01[][NG][Data][x] I
* The Monitor transmi_ ACK (acknowledgement) based on
this format when receiving abnormal data from non-viable
functions or communication errors,
Data i: tHegal Code
2: Not supported function
3: Wait more time
COM- COM- DATA 0 DATA ! DATA 2 DATA 3 DATA 4 DK_"A 5
MAND 1 MAND 2 (I.4_e_mal) (I..le×_d_ima_} (I.4ex_de_imal) (Hex'ad_n_a_} (_._ade¢2ma_} {Nexad_ma_}
r_r#r low attribute
23. Cb,3nnel Ad_Del m b _ _ 01
24. Key_ m c key comte
25. Input _ect x b *(Rste_" to p.47)
Operating Guide
Loading ...
Loading ...
Loading ...