Loading ...
Loading ...
Loading ...
46
4.7.2.7 Vehicle Status
This function checks the current condition of the vehicle, such as the communications
protocols of OBDII modules, quantity of fault codes, and the status of the Malfunction
Indicator Light (MIL).
4.8 Exiting Diagnostics
The Diagnostics application remains open as long as there is an active communication
with the vehicle. You must exit the diagnostics operation to stop all communications
with the vehicle before closing the Diagnostics application.
NOTE
Damage to the vehicle electronic control module (ECM) may occur if the
communication is disrupted. Ensure all forms of communication link such as data cable,
USB cable, and wireless or wired network, are properly connected throughout the test.
Exit all interfaces before disconnecting the test cable and power supply.
➢ To exit the Diagnostics application
On an active diagnostic screen:
1. Tap the Back or ESC button to exit a diagnostic session step by step.
2. Or tap the Vehicle Swap button on the Diagnostics Toolbar to return to the
Vehicle Menu screen.
On the Vehicle Menu screen:
1. Tap the Home button on the top toolbar.
2. Or tap the Back button on the Navigation Bar at the bottom of the screen.
3. Or tap the Home button on the Diagnostics Toolbar to exit the application
directly and return to the MaxiPRO Home Menu.
Now, the Diagnostics application is no longer communicating with the vehicle and it is
safe to open other MaxiPRO applications.
Loading ...
Loading ...
Loading ...