Loading ...
Loading ...
Loading ...
Introduction
We would like to thank you for purchasing one of our JVC products.
Before operating this unit, read this manual carefully and thoroughly to
obtain the best possible performance from your unit, and retain this manual
for future reference.
AboutThisManual
This mtmual is organized as follows:
• The manual mainly explains operations using the
buttons and controls on the remote control. You can also
use the buttons on the unit if they have the same or
similar names (or marks) as those on the remote
control.
If operation using the unit is different from that using
the remote control, it is then explained.
• Basic and common information that is the same for many
functions is grouped in one place, and is not repeated in
each procedure. For instance, we do not repeat the
information about turning on/off the unit, setting the
volume, changing the sound effects, and others, which are
explained in the section "Common Operations" on pages
10to 12.
• The following marks are used in this manual:
Gives you warnings trod cautions to prevent
damage or risk of tire/electric shock.
Also gives you infommtion which is not good
for obtaining the best possible performance
from the unit.
Gives you information and hints you had better
know.
Precautions
Installation
• Do not grasp the control knobs when moving or carrying
the unit.
• Install in a place which is level, dry and neither too hot nor
too cold--between 5"C mid 35°C (41 °F mad 95T).
• Install the unit in a location with adequate ventilation to
prevent internal heat built-up in the unit.
• Leave sufficient disttmce between the unit and the TV.
• Keep the speakers away from the TV to avoid interference
with Yg.
I_ O NOT install the unit in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or vibration.
I
Powersources
• When unplugging t¥om the wall outlet, always pull the
plug, not the AC power cord.
DO NOT handle the AC power cord with wet
hands.
Moisturecondensation
Moisture may condense on the lens inside the unit in the
following cases:
• After starting heating in the room
• In a damp room
• If the unit is brought directly from a cold to a warm place
Should this occur, the unit may malfunction. In this case,
leave the unit turned on for a few hours until the moisture
evaporates, unplug the AC power cord, and then plug it in
again.
Others
• Should any metallic object or liquid fall into the unit,
unplug the unit _md consult your dealer before operating
any further.
• If you are not going to operate the unit for an extended
period of time, unplug the AC power cord from the wall
outlet.
I
If tmything goes wrong, unplug the AC power cord and
consult your dealer.
I
DO NOT disassemble the unit since there are no [
I
user serviceable parts inside.
Loading ...
Loading ...
Loading ...