Loading ...
Loading ...
Loading ...
AM antenna
Make sure to connect the wire correctly: The white end to
AM EXT, the black end to GND.
r-- AMEXT
AM
LOOP
L__ rh GND
i!F!
4 AM loop antenna
(supplied)
Vinyl-covered wire
(not supplied)
1 Press and hold the clamp of the AM terminal
on the rear of the unit.
2 Insert the end of the AM loop antenna cord
into the terminal.
• If the AM loop antenna wire is covered
with vinyl, remove the vinyl by twisting it
as shown in the diagram. J
3 Release the finger from the clamp.
4 Turn the AM loop antenna until you have the
best reception.
Toconnectan outdoor AM antenna
When reception is peer, connect a single vinyl-cevered wire
to the AM terminal and extend it horizontally. (The AM loop
antenna must remain connected.)
_Fol" better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
ConnectingSpeakers
DO NOT carry the speaker by holding the tube I
duct (on the top of the speaker).
f
1,2
3
Speaker cord Black Speaker
(blue/black) cord
_, (red/black)
Blue Red
Black
Speaker cord I =r::0
(blue/black)
From right From right
main subwoofer's
speaker's terminals
terminals
From left From left
main subwoofer's
speaker's terminals
terminals
1 Press and hold the clamp of the speaker
terminal on the rear of the unit.
2
• If the wire is covered with vinyl, remove
the vinyl by twisting it as shown in the
diagram.
Insert the end of the speaker cord into the
terminal.
Match the colors (polarity): Blue (+) to blue (+) trod black
(-) to black (-); red (+) to red (+) and black (-) to black
(-).
S
/
3 Release the finger from the clamp.
IMPORTANT:
• Use only speakers with the same speaker impedance as
indicated by the speaker terminals on the rear of the
unit.
• DO NOT connect more than one speaker to one speaker
terminal.
Loading ...
Loading ...
Loading ...