Loading ...
Loading ...
Loading ...
EN
7. Operating Instructions
7.2 Connecting an Air Line or Tool
CAUTION! ALWAYS check the air line
requirements for any tools or air lines connected
to this device. DO NOT use this compressor with
any air line or tool with which it is not
compatible.
WARNING! ALWAYS ensure that the air line is
interrupted when connecting an air line or tool.
DO NOT attempt to connect an air line or tool if
air is escaping from the compressor.
Important: ALWAYS ensure that the on/o switch (6) is in
the o (
) position before attaching or detaching an air
line or tool. Draper Tools recommends pressurising the
tank rst, leaving the output pressure regulator (9) in its
lowest position, then connecting the air line and tool.
3 Fig.
(7)
This device is tted with a female Euro-style air line
adaptor. To connect an air line or tool, insert a male
Euro-style air line coupling (attached to the item) into the
outlet (7) and allow the collar to snap up to secure it.
Once the air line is connected, the output pressure may
be set; see 7.4 Setting the Output Pressure.
Important: Draper Tools strongly recommends that this
compressor is used with an in-line water separator in the
air line to protect your connected tools and any sprayed
materials. ALWAYS adhere to the manufacturer
instructions of any accessories.
Important: Draper Tools recommends that PTFE tape is
wrapped around all threaded connections along the air
line for better airtight seals. For best results, wrap the
tape in the opposite direction to the thread.
Important: Draper Tools recommends using a suitable
whip hose between the connected tool and the air line to
reduce vibrations at the tool. Take care as whipping
hoses may cause injury.
4 Fig.
(8)
To detach the connection from the compressor outlet,
rotate the output pressure regulator (9) fully
anticlockwise and allow the output pressure gauge (8) to
drop to zero. Then pull down the collar to eject the
connected item.
Important: ALWAYS rst allow the outlet pressure to
drop to zero and grip the air line when detaching it from
the compressor to avoid injury from whipping hoses.
Important: This product is NOT rated for continuous use.
The pressurising function of this compressor may be
used for a maximum of 90 seconds in any ten-minute
period. ALWAYS allow the device to rest and cool before
reuse.
– 11 –
Loading ...
Loading ...
Loading ...