Loading ...
Loading ...
Loading ...
7. Operating Instructions
7.1 Inserting and Removing the
Battery Pack
Important: ONLY use this tool with batteries and
chargers from the Draper Tools D20 range. The batteries
MUST be rated 4.0AH or higher. Use of third-party
batteries or chargers will invalid your warranty. Read all
the safety and operation instructions provided with these
parts before use.
Important: ALWAYS ensure that the compressor is
switched o when inserting or removing the battery.
This product can be used with either one or two 4.0Ah or
5.0Ah D20 batteries installed and will drain the charge
from each battery in turn.
1 Fig.
(12)
To install a battery pack, slide it down into the battery
mounts at the back of the compressor until it clicks into
place.
Important: DO NOT force the battery and ensure it is
rmly secured before use.
To remove a battery pack, press and hold the battery
release button (12) and slide the battery up and out from
the compressor.
2 Fig.
(13)
To view the battery charge on the battery itself, press the
charge indicator button (13) at any time.
– 10 –
(1)
Loading ...
Loading ...
Loading ...