Loading ...
Loading ...
Loading ...
7
2. Setting up the display
This will then keep the USB power and
charging functions active even when
the monitor is in sleep/standby mode.
Note
If you Turn OFF your monitor via the
power switch at any given time, all the
USB ports will power OFF.
Warning
USB 2.4Ghz wireless devices, such
as, wireless mouse, keyboard, and
headphones, maybe have interference
by USB3.2 or higher version, the high-
speed signal devices, which may result
in a decreased efficiency of the radio
transmission. Should this happen,
please try the following methods to
help reduce the effects of interference.
•Try to keep USB2.0 receivers away
from USB3.2 or higher version of
connection port.
•Use a standard USB extension cable
or USB hub to increase the space
between your wireless receiver
and the USB3.2 or higher version of
connection port.
7
The remote control is powered by
two 1.5V AAA batteries.
To install or replace batteries:
1. Press and then slide the cover to
open it.
2. Align the batteries according to the
(+) and (–) indications inside the
battery compartment.
3. Replace the cover.
Note
The incorrect use of batteries can result
in leaks or bursting. Be sure to follow
these instructions:
•Place “AAA” batteries matching the
(+) and (–) signs on each battery to
the (+) and (–) signs of the battery
compartment.
•Do not mix battery types.
•Do not combine new batteries with
used ones. It causes shorter life or
leakage of batteries.
•Remove the dead batteries
immediately to prevent them
from liquid leaking in the battery
compartment. Don’t touch exposed
battery acid, as it can damage your
skin.
•If you do not intend to use the
remote control for a long period,
remove the batteries.
Loading ...
Loading ...
Loading ...