Loading ...
Loading ...
Loading ...
CONNECT BATTERY (See Fig. 2)
i ii .......... illl i ii,lll
CAUTION: Do not short battery termi-
_ rials. Before connecting battery, re-
move metal bracelets, wristwatch
bands, rings, etc.
Positive terminal must be connected
first to prevent sparking from acciden-
tal grounding,
...... i Illll I illlllUll illl illlll
= Lifthood to raised position.
• Open terminal access doors, remove termina! protec-
tive caps and discard.
o If this battery is put into service after month and year
indicated on label (label located between terminals)
charge battery for minimum of one hour at 6-10 amps,
, First connect RED battery cable to positive (+) battery
terminal with hex bo t, flatwasher, lock washer and hex
nut as shown. Tighten securely.
° Connect BLACK grounding cable to negative (-)battery
terminal with remaining hex bolt, flat washer, lock
washer and hex nut. Tighten securely..
o Close terminal access doors.
Use terminal access doors for:
o Inspection for secure connections (to tighten hard-
ware)..
° Inspection for corrosion_
• Testing battery.
° Jumping (if required)_
° Periodic charging.
HEX NUT
DISCARD TERMINAL
:_ROTECTIVE CAPS
LOCK FLAT
WASHER WASHER
• . / HEX
BOLT
ro.sjTIvE
(RED)
CABLE
NEGA71VE
(BLACK)
CABLE
INSTALL SEAT (.See Fig. 3)
Adjustseat before tightening adjustment knob.
° Remove cardboard packing on seat pan,
o Place seat on seat pan and assemble shoulder bolt,
° Assemble adjustment knob and flat washer loosely
Do not tighten.
• Tighten shoulderbolt securely.
• Lower seat into operating position and sit on seat
• Slideseat untila comfortable positionisreached which
aUows you to press clutch/brake pedal all the wa_
down°
° Get off seat withoutmoving its adjusted position.
° Raise seat and tighten adjustment knob securely.
SEAT PAN
SHOULDER
BOLT
ADJUSTMENT
KNOB
SEAT
FLAT WASHER
FIG. 3
FIGo2
8
Loading ...
Loading ...
Loading ...