Loading ...
Loading ...
Loading ...
LY
Your new tractor has been assembled at the factor/with the exception of those parts left unassembled for shipping purposes.,
To ensu re safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely, Use
the correct tools as necessary to insure proper tightness.
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set wil! make assemblyeasier. Standard
wrench sizes are listed,
(2) 7/16" wrenches Tire pressure gauge
(1) 1/2" wrench Utility knife
(1) 9/16" wrench
(1) 3/4" socket with drive ratchet
When right or left hand is mentioned in this manual, it
means when you are in the operating position (seated
behind the steering wheel),
TO REMOVE TRACTOR FROM CARTON
UNPACK CARTON
- Remove all accessible loose parts and parts cartons
from carton (See page 6)°
. Cut, from top to bottom, along 1ineson all four corners
of carton, and lay panels flat,,
• Remove mower and packing materials.
° Check for any additional loose parts or cartons and
remove,
BEFORE ROLLING TRACTOR OFF SKID
ATTACH STEERING WHEEL (See Fig. 1)
° Remove hex bolt, lock washer and large flat washer
from steering shaft°
° Positionfront wheels of the tractorsothey are pointing
straight forward°
• Slide the steering sleeve over the steering shaft°
. Position steering wheel so cross bars are horizontal
(left to right) and slide onto steeringwheel adapter.
• Secure steering wheel to steering shaft with hex bolt,
lock washer and large flat washer previously removed,,
Tighten securely.
- Snap steering wheel insert into center of steering
wheel.
. Remove protective plastic from tractor hood and grill
IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES
tN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR
IS TO ROLL OFF SKID.
_ STEERING WHEEL
INSERT
HEX BOLT
Lock
. -.- WASHER
_I_,_ LARGE FLAT
},
! I _/ /
/ I
I I ii / I
L
FIG. 1
TO ROLL TRACTOR OFF SKID (See Opera-
tion section for location and function of con-
trols)
• Press lift lever plunger and raise attachment liftleverto
its highest position,,
• Release parking brake by depressing clutch/brake
pedal
• Place gearshift lever in neutrat (N) position.
° Roll tractor backwards off skid
7
Loading ...
Loading ...
Loading ...