Loading ...
Loading ...
Loading ...
Cassida C500 Compact Coin Counter
13
After the largest diameter coins/tokens are counted load the rejected
coins/tokens back into the hopper. Set the diameter dial to the
largest diameter coin/token in the hopper. Set the thickness to the
thickest coin/token in the hopper. Count the coins/tokens. Repeat
the process until all coins/tokens have been counted and sorted.
Several trial runs should then be performed to determine the
machine’s optimal settings. The following suggestions should help
establish proper settings. Coin jamming may be experienced during
trial runs.
•If coins/tokens are observed in the reject coin box, the diameter
adjustment should be decreased by 0.25mm (one click).
•If coin jamming on the coin runway is experienced, the diameter
setting should be increased by 0.25mm (one click).
•If double-stacked coins/tokens are observed under the lock
plate, this can indicate that the thickness setting is too large. Try
decreasing the setting by 0.05mm.
•If centrifugal wheel jamming is observed, it could indicate that
the thickness setting is too small. Try increasing the thickness
setting by 0.05mm.
Coins jammed in the
runway.
Double-stacked coins on
the centrifugal disc.
Loading ...
Loading ...
Loading ...