Loading ...
Loading ...
Loading ...
Strength Training Collection 13 12 GluteBlast User Manual Lifepro
ATTACH THE SUPPORT
CUSHION TO THE FRAME
1. Slide the support cushion (C) into the opening in the top of the support
cushion column. See Figure 4.
a. Make sure the cushion is oriented properly with the bottom
bolt-head in the post facing the BACK of the machine. See
Figure 4 Insert.
2. Twist the height adjustment knob on the support cushion column
counterclockwise to loosen it, but don’t remove it.
3. Pull the knob head out to allow the support cushion to slide up and
down freely. Release the head of the knob when the cushion is at the
desired height.
a. You may need to slightly slide the support cushion post up or down
to get the pin behind the knob head to click into place in one of the
five height adjustment holes.
4. Fully tighten the knob by twisting it clockwise.
4
Figure 4
ATTACH THE ADJUSTABLE HANDLES
TO THE MAIN FRAME
1. Gather the two adjustable handles (F) and two short locking pins (E).
2. Insert a handle into one of the large holes in the top of the frame next
to set of fixed handles. See Figure 5.
a. The adjustable handles may be installed in two different
configurations: parallel to the main frame (as shown in Figure 5)
or perpendicular to the frame (facing out 90-degrees from the
frame).
3. Insert a locking pin through the outside of the main frame and each
handle to lock the handles into place.
5
Figure 5
G
Height
Adjustment
Knob
BACK
D
F
Loading ...
Loading ...
Loading ...