Loading ...
Loading ...
Loading ...
ExternalControlDeviceSetup
26. ISM Method (Command2:p)
• To avoid having a fixed image remain on screen.
Transmission
I[j][p][ ][Set Ig][ ][gata][Cr] ]
Data 0: Normal 2: Orbiter
1: White wash 3: Inversion
Acknowledqement
I[p] [ ][Get ID][ ][OK][gata][x] ]
27. Low Power (Command2:q)
• To control the low power function on/off.
Transmission
I[i][q][ ][Set Ig][ ][gata][Cr] ]
Data 0: Low power off
1: Low power on
Acknowledqement
I[q] [ ][Set ID][ ][OK][gata][x] ]
28. Orbiter Time Setting (Command2:r)
• To adjust orbiter operation time term.
Transmission
I[j][r][ ][Set ID][ ][gata][Cr] ]
Data Min: 1 ~ Max: FE
A ckno wledqement
I[r][ ][Set ID][ ][OK][Data][x] ]
29. Orbiter Pixel Setting (Command2:s)
• To adjust pixel number in orbiter function.
Transmission
I[j][s][ ][Set ID][ ][Data][Cr] ]
Data Min:l ~ Max:9
A ckno wledqement
I[s][ ][Set Ig][ ][OK][gata][x] ]
30. Picture Size Setting for Double Window
mode (Command2:t)
• To adjust main window size in Double Window mode.
Transmission
[[jl[t][ ][Set ID][ ][Datal[Crl ]
Data Min: 0 ~ Max: 14
• Refer to 'Real data mapping1'. See page 35.
A ckno wledqement
[[t][ ][Set ID][ ][OK][gata][x] ]
38 Plasma TV
31. Auto Configure (Command2:u)
• To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
[[j][u][ ][Set ID][ ][Datal[Cr] ]
Data 1: To set
Acknowledqement
I[u][ ][Set ID][ ][OK][Data][x]
32. Tune command (Command: m a)
• Tune channel to following physical number
Transmission
[[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][Cr] J
Data 0: Air: 02 ~ 45, Cable: 01, 0E ~ 7D
1:0
2:0
3: High --> Main Channel: O, Sub Channel: 1
Low --> Air: 0, CATV: 1
Acknowledqement
[[a][ ][Set ID][ ][OK][Data0][ ][Data1][ ][Data2][ ][Data3][x] J
33. Channel Add/Del (Command: m b)
• To add and delete the channels
Transmission
[[m][b][ ][Set ID][ ][gata][Cr] ]
Data 0: Channel Memory
1: Channel Erase
Acknowledaement
[[b][ ][Set ID][ ][OK][Data][x] ]
34. Key (Command: m c)
• To send IR remote key code
Transmission
[[m][c][ ][Set ID][ ][Data][ ][Cr]
Data Key code: Refer to page 40.
Acknowledqement
[[c][ ][Set ID][ ][OK][Data][x]
Loading ...
Loading ...
Loading ...