Loading ...
Loading ...
Loading ...
installation
NOTE: All cables shown are not included with the TV
- To avoid picture noise (interfetence)_ _eave an adequate distance between the VCR and TV
Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the _reen for a _ong pedod of t_me,
Typically a frozen stiB picture from a VCR if the 4:3 picture format is used the fixed images on the sides of the screen may
remain visible on the screen,
Connection Option 1
Set VCR output switch to 3 or 4 and then tune
TV to the same channel humor,
Connection Option 2
1, Connect the audio and video cables from the
VCR's output: jacks to the 3_# input jacks, as
shown in the figure,
When connecting the TV to VCR, match the
jack colors (Vi_o = yellow, Audio Left = white,
and Audio Right = red),
If you conn_ an S-WDEO output from VCR to
the S-WDEO input_ the picture quality is
improved; compared to connecting a regular
VCR to the Video input
2, Insert a video tape into the VCR and press .....
PLAY on the VCR (Refer to the VCR owner's T
manual,)
/
3, Select the input souroe by the TViVIDEO but- i......
ton on the remote control (If connected to A._"
INPUT 1_ select Vid_eo 1 input source)
Do not connect to both Vi_o and S-
Video at the same time. }n the event
that you connect both Video and the
SVi_o cables, only the SVideo wil_
work.)
|
- After subscribing to a cable TV service from a [_al provider you can watch cable q2ยข programming. The TV cannot display TV
programming unless a TV tuner device or cable TV converter box is connected to the TV.
- For fu_er information regarding cable TV service, contact your local c_le TV service provider(s),,
Connection Option 1
1, Select 3 or 4 with channef switch on cable box_
2, Tune the TV channet to the same selected output channe} on
cable box_
3 Select channets at the cabte box or with the cable box remote
control
Connection Option 2
1. Connect the audio and vi_o cabies from the Cabie Box's output
jacks to the TV input _acks, as shown in the figure.
When connecting the TV to a Cable Box, m_ch the jack colors
(Video = yeBow_ Audio Left = white, and Audio Right = red).
2. Select the input source by using the W/VIDEO button on the
remote control. (If connected to AA/INPUT 1, select Video 1
input source)
3. Select your desired channel with the remote control for cable
box.
il
Cable Box
12 Plasma TV
Loading ...
Loading ...
Loading ...