Loading ...
Loading ...
Loading ...
01. Power (Command2:a)
• To control Power On/Off of the TV.
Transmission
[[k][a][ ][Set In][ ][gata][Cr] ]
Data 0 :Power Off 1
Acknowledqement
[[a][ ][Set In][ ][OK][gata][x] J
: Power On
* In a like manner, if other functions transmit 'FF' data
based on this format, Acknowledgement data feedback
presents status about each function.
02. Input Select (Command2:b) (Main Picture Input)
• To select input source for the TV.
You can also select an input source using the TV/VlDEO
button on the TV's remote control.
Transmission
[[k][b][ ][Set In][ ][Data][Cr] ]
Data 0 :TV 4 :Component2
1 :Video1 5 :RGB
2 :Video2 6 :DVI
3 : Component 1
Acknowledqement
[[b][ ][Set ID][ ][OK][Data][x] ]
03. Aspect Ratio (Command2:c) (Main picture format)
• To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Screen menu.
Transmission
[[k][c][ ][Set ID][ ][Data][Cr] ]
Data 0 : Normal screen (4:3)
1 : Wide screen (16:9)
2 : Horizon
3 : Zoom
Acknowledaement
[[c][ ][Set In][ ][OK][Data][x] ]
04. Screen Mute (Command2:d)
• To select screen mute on/off.
Transmission
[[k][d][ ][Set In][ ][Data][Cr] ]
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
Acknowledqernent
[[d][ ][Set In][ ][OK][Data][x] ]
External Control Device Setup
05. Volume Mute (Command2:e)
• To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
IN[e][ ][Set In][ ][Data][Cr] ]
Data 0 : Volume mute on (Volume off)
1 : Volume mute off (Volume on)
Acknowledqement
I[e][ ][Set In][ ][OK][Data][x] ]
06. Volume Control (Command2:f)
• To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission
J[kl[f][][Set ID][ ][Datal[Cr] ]
Data Min:0-Max:64
• Refer to 'Real data mapping 1' as shown below.
Acknowledgement
J[f][ ][Set In][ ][OK][Data][x] J
07. Contrast (Command2:g)
• To adjust screen contrast.
You can also adjust contrast in the Picture menu,
T1ansmissi_n
I[kl[g][][setID][ ][Data][Cr] ]
Data Min:0~Max:64
• Refer to 'Real data mapping 1' as shown below.
Acknowledqement
[[g][ ][Set In][ ][OK][Data][x] ]
08. Brightness (Command2:h)
• To adjust screen brightness.
You can also adjust brightness in the Picture menu.
Transmission
J[k][h][ ][Set In][ ][Data][Cr] J
Data Min:O_Max:64
• Refer to 'Real data mapping 1' as shown below.
Acknowledqement
[[h][ ][Set In][ ][OK][Data][x] I
* Real data mapping 1
0 Step 0
A Step 10 (SET ID 10)
F Step 15 (SET ID 15)
10 Step 16 (SET ID 16)
63 Step 99 (SET ID 99)
64 Step 100
Owner_ Manual 35
Loading ...
Loading ...
Loading ...