Loading ...
Loading ...
Loading ...
Page 7
Installation Safety Precautions
Electrical Connection
This appliance should be properly grounded for
your safety. The power cord of this appliance is
equipped with a three-prong plug which mates
with standard three prong wall outlets to minimise
the possibility of electrical shock.
Please look at the rating label to know the rating
voltage and connect the dishwasher to the
appropriate power supply. Use the required fuse
10 amp, time delay fuse or circuit breaker
recommended and provide separate circuit
serving only this appliance.
Ensure the voltage and frequency of the power
being used corresponds to those on the rating
plate. Only insert the plug into an electrical socket
which is earthed properly. If the electrical socket to
which the appliance must be connected is not
appropriate for the plug , replace the socket, rather
than using a adaptors or the like as they could
cause overheating and burns.
The cord should be secured behind the appliance
and not left exposed or dangling to prevent
accidental injury.
The appliance should always be plugged into its
own individual electrical outlet which has a voltage
rating that matches the rating label on the
appliance. This provides the best performance and
also prevent overloading house wiring circuits that
could cause a fire hazard from overheated. Never
unplug the appliance by pulling the power cord.
Always grip the plug firmly and pull straight out
from the receptacle. Repair or replace immediately
all power cords that have become frayed or
otherwise damaged.repair / replacement should
be done by a qualified electrician. Do not use a
cord that shows cracks or abrasion damage along
its length or at either end. When moving the
appliance, be careful not to damage the power cord.
Extension Cord
DO NOT USE AN EXTENSION CORD OR AN
ADAPTER PLUG WITH THIS APPLIANCE.
DO NOT UNDER ANY CIRCUMSTANCES
CUT OR REMOVE THE EARTHING
CONNECTION FROM THE POWER CORD
SUPPLIED. FOR PERSONAL SAFETY,
THIS APPLIANCE MUST BE PROPERLY
GROUNDED.
Loading ...
Loading ...
Loading ...