Loading ...
Loading ...
Loading ...
TC/UB Menu
Menu screen for setting time code and user’s bit.
This item cannot be selected in the Media mode,
during recording or live streaming.
TC Generator
For setting the operation of the time code.
0
Free Run (NTP):
Activates
NTP synchronization of the time code
and superimposing of TC information
(metadata) on the streaming data.
0
Free Run (GPS)L:
Time code information can be synchronized with
the date/time information acquired from the
GPS.
0
Free Run (Ext):
External time code input will be synchronized
with this and the time code will be recorded.
0
Free Run:
The time code operates in the run mode at all
times regardless of the recording status. It
continues to run even when the power of the
camera recorder is turned off.
0
Rec Run:
The time code operates in the run mode during
recording. It continues to run in the order of the
recorded clips as long as the SD card is not
replaced. If the SD card is removed and
recording is made on another card, time code
will be recorded on the new card from where it
was left off in the previous card.
0
Regen:
The time code operates in the run mode during
recording. When the SD card is replaced, the
last time code recorded on the card is read and
recorded on a new card so that the time code
continues in running order.
[Setting Values: Free Run (NTP), Free Run
(GPS)L, Free Run (Ext), Free Run, RRec Run,
Regen]
Memo :
0
When [Rec Mode] is configured to “Interval
Rec” or “Frame Rec”, only “Rec Run” and
“Regen” are selectable.
0
When [System] is configured to “High-Speed”,
only “Rec Run” and “Regen” are selectable.
0
When [Frame Rate] is set to “24p”, “Free Run
(GPS)” cannot be selected.
9
Time Zone
For configuring the time zone.
0
Local Time:
Time code with time zone corrected for time
information obtained from NTP
0
UTC:
Time code without time zone correction
[Setting Values: Local Time, RUTC]
Memo :
0
This item can be configured when [TC
Generator] is set to “Free Run(NTP)”.
9
Streaming Format
For configuring the time code system.
[Setting Values: LTC, RVITC]
Memo :
0
This item can be configured when [TC
Generator] is set to “Free Run (NTP)”.
0
This is fixed at “VITC” when [Live Streaming] B
[Optional Adapter] is set to “Enable”.
TC Preset
For setting the time code (hour, minute, second,
frame).
Display : Drop setting 02:02:25.20
: Non Drop setting 02:02:25:20
(A P77 [Setting Time Code Generator] )
TC/UB Menu
125
Menu Display and Detailed Settings
Loading ...
Loading ...
Loading ...