Tripp Lite B126-002 Owner’s Manual

Loading ...

Extender/Splitter Daisy-Chain with

Remote/Repeater Installation (B126-004 only)

Using Cat5e/6 cable, connect the RJ45 OUTPUT port on the ﬁrst remote/

repeater unit to the RJ45 INPUT port on a second remote/repeater unit.

Connect a monitor to the HDMI OUTPUT port on the remote/repeater

unit that you just added using a Tripp Lite P568-Series HDMI Cable.

Connect the external power supply to the remote/repeater unit and plug

it into a Tripp Lite Surge Protector, PDU or UPS. The green power LED

and the green RJ45 LEDs illuminate to indicate the unit is receiving

power.

To add a third remote/repeater unit, repeat steps 11 through 13. To

ﬁnish your installation with a B126-1A0 or B126-1A0-WP-1 remote

receiver unit, proceed to step 15.

Using Cat5e/6 cable, connect the RJ45 OUTPUT port on the last remote/

repeater unit to the RJ45 INPUT port on a B126-1A0 or B126-1A0-WP-1

remote receiver unit.

Connect a monitor to the HDMI OUTPUT port on the remote receiver unit

using a Tripp Lite P568-Series HDMI Cable.

Connect the external power supply to the remote receiver unit and

plug it into a Tripp Lite Surge Protector, PDU or UPS. The green LED

illuminates to indicate the unit is receiving power from the external

power supply. The orange LED illuminates to indicate the unit is

connected to a powered ON remote/repeater unit.

Repeat steps 8 through 17 for each additional RJ45 output port on the

local transmitter units.

Turn on the power to the HDMI source. The orange RJ45 LEDs on the

local units illuminate to indicate a signal is being received from the

source.

17-07-081-933731.indb 26 8/2/2017 8:57:27 AM

Loading ...

Tripp Lite B126-002 2-Port HDMI over Cat5/6 Extender/Splitter, Box-Style Transmitter for Video/Audio, Up to 150 ft. 45 m, TAA