Tripp Lite B126-002 Owner’s Manual

Loading ...

Extender/Splitter with Remote/Repeater Installation

Make sure the HDMI source is powered OFF.

Connect the HDMI source to the INPUT port on the B126-002 or

B126-004 using a Tripp Lite P568-Series HDMI Cable.

Optional for B126-004: Connect a local monitor to the LOCAL HDMI

port using a Tripp Lite P568-Series HDMI Cable.

Connect the external power supply to the local unit and plug it into a

Tripp Lite Surge Protector, PDU or UPS. The green RJ45 LEDs illuminate

to indicate power is being received from the external power supply. An

additional Red LED on the B126-004 also illuminates to indicate power

is being received.

Using Cat5e/6 cable, connect one of the RJ45 output ports on the local

unit to the RJ45 input port on the B126-110 remote/repeater unit.

Connect a monitor to the HDMI OUTPUT port on the remote/repeater

unit using a Tripp Lite P568-Series HDMI Cable.

Connect the external power supply to the remote/repeater unit and plug

it into a Tripp Lite Surge Protector, PDU or UPS. The green power LED

and the Green RJ45 LEDs illuminate to indicate the unit is receiving

power.

Up to four units can be daisy-chained (three remote/repeaters and one

receiver). To connect additional remote/repeater units, proceed to step 8.

To ﬁnish your installation with a B126-1A0 or B126-1A0-WP-1 remote

receiver unit, proceed to step 12.

Using Cat5e/6 cable, connect the RJ45 OUTPUT port on the ﬁrst remote/

repeater unit to the RJ45 INPUT port on a second remote/repeater unit.

Connect a monitor to the HDMI OUTPUT port on the remote/repeater

unit that you just added using a Tripp Lite P568-Series HDMI Cable.

17-07-081-933731.indb 17 8/2/2017 8:57:25 AM

Loading ...

Tripp Lite B126-002 2-Port HDMI over Cat5/6 Extender/Splitter, Box-Style Transmitter for Video/Audio, Up to 150 ft. 45 m, TAA