Tripp Lite B126-002 Owner’s Manual

Loading ...

Make sure the HDMI source is powered OFF.

Connect the HDMI source to the INPUT port on the B126-004 using a

Tripp Lite P568-Series HDMI Cable.

Connect the LOCAL port on the B126-004 to the INPUT port on a

second B126-004 using the included 1 ft. HDMI daisy-chain cable.

Repeat step 3 if connecting a third B126-004.

Optional: Connect a local monitor to the LOCAL HDMI port of the last

B126-004 using a Tripp Lite P568-series HDMI cable.

Connect the external power supply to the ﬁrst B126-004 in the

daisy-chain and plug it into a Tripp Lite Surge Protector, PDU or UPS.

The green RJ45 LEDs and the red Power LED on the B126-004 will

illuminate to indicate power is being received from the external power

supply.

Repeat step 6 for each additional B126-004 in the daisy chain.

Using Cat5e/6 cable, connect one of the RJ45 output ports on the local

unit to the RJ45 input port on the B126-110 remote/repeater unit.

Connect a monitor to the HDMI OUTPUT port on the remote/repeater

unit using a Tripp Lite P568-Series HDMI Cable.

Connect the external power supply to the remote/repeater unit and plug

it into a Tripp Lite Surge Protector, PDU or UPS. The green power LED

and the green RJ45 LEDs illuminate to indicate the unit is receiving

power.

Up to four units can be daisy-chained (three remote/repeaters and one

receiver). To connect additional remote/repeater units, proceed to step

11. To ﬁnish your installation with a B126-1A0 or B126-1A0-WP-1 remote

receiver unit, proceed to step 15.

Extender/Splitter Daisy-Chain with

Remote/Repeater Installation (B126-004 only)

17-07-081-933731.indb 25 8/2/2017 8:57:27 AM

Loading ...

Tripp Lite B126-002 2-Port HDMI over Cat5/6 Extender/Splitter, Box-Style Transmitter for Video/Audio, Up to 150 ft. 45 m, TAA