Loading ...
Loading ...
Loading ...
GPW3200 GAS PRESSURE WASHER
19
6.3 Starting Engine
See Section 5.4 Starting Pressure Washer
on Page 15 to start the pressure washer.
1. Turn engine switch to the “
I
” position.
2. Open fuel valve to the “
ON
” position.
3. Push the choke lever by moving the lever to the
“
START
” position.
4. Adjust the throttle lever to “
HIGH
”
5. Locate recoil cord and pull slowly until resistance
is felt. At this point, pull rapidly to start engine.
6. Once engine starts, open choke lever by moving
the lever to “
RUN
” position.
6.4 Stopping Engine
1. Turn engine switch to the “
O
” position.
2. Turn off fuel valve to the “
OFF
” position.
7.
C
LEANNING AND
M
AINTENANCE
7.1 Cleaning Water Inlet Filter
•This pressure washer is equipped with a water inlet
filter (J).
• The water inlet filter (J) must be kept clean at all
times, otherwise it can restrict the water flow to the
pump unit and damage it.
• Remove the quick-connect coupler from the water
inlet, then remove and clean the water inlet filter (J).
7.2 Engine Maintenance
Draining Engine Oil
FUEL TANK CAPACITY: 3.6L
IMPORTANT
• Keep fuel away from sparks, open flames, pilot
lights, heat, and other ignition sources.
• Check fuel hoses, tank, caps, and fittings
frequently for cracks or leaks. Replace if necessary.
• If fuel spills, wait until it evaporates before starting
engine.
• Fill the fuel tank outdoors or in well-ventilated
areas.
IMPORTANT
If you have problems starting the pressure washer,
call the Green-Power America Toll Free number at
1-888-834-4218
and one of our customer service
representatives will be glad to assist you.
IMPORTANT
Before each use:
• Check the oil and fuel level and fill if necessary.
• Make sure that spark plug, muffler, fuel cap, and
air filter are in place and secured.
• Do not crank engine with spark plug removed.
CAUTION
Return the starter cord handle (6) gently to its
starting position to prevent damage to the starter or
the housing.
CAUTION
DO NOT
operate this pressure washer without the
water inlet filter in place, as deposits could build up
internally and affect the functioning of the unit.
11
Loading ...
Loading ...
Loading ...