Loading ...
Loading ...
Loading ...
voltages are greater than 25VAC rms or 35VDC.
These voltages are considered to be a shock hazard.
• DO NOT operate the meter with the battery cover
removed or the case open.
• DO NOT remove the cover or open the case of the
meter without first removing it from the main power
source.
• DO NOT allow children to operate this device.
• USE a 9V DC battery when replacing the battery
within the device.
• Make sure to insert the battery under the correct
polarity indicated in the device.
• DO NOT use leaking batteries.
• DO NOT dispose old batteries in fire.
• Expired or damaged batteries can cause cauterization
on contact with skin. Always therefore, use suitable
hand gloves for protection in such cases.
• Disconnect circuit power and discharge all high
voltage capacitors before testing resistance,
continuity, diodes, or capacitance.
• Before measuring current, check the meter’s fuses
and turn off power to the circuit before connecting
the meter to the circuit.
• In the case the device is going to be unused for an
extended period of time, remove the battery before
storage.
AC or DC Low Battery
AC Current Diode
DC Current Fuse
Earth Ground Continuity Test
Double Insulated Warning
- 3 -
Loading ...
Loading ...
Loading ...