Loading ...
Loading ...
Loading ...
WARNING
Square Wave Output
To avoid damage to the meter and/or the object of
measurement, do not allow output terminals (red test
lead) to surpass 10V.
1. Plug the red test lead into the VΩmA terminal, then
plug the black test lead into the COM terminal.
2. Set the rotary switch to the OUT setting.
3. Connect the test leads across with the object of
measurement. Hold them in place until the results on
the display stabilize.
4. When measurement is completed, disconnect the test
leads from the object of measurement.
NOTE
• The frequency is approximately 50Hz.
• When loaded to 1MΩ, the output scope will be higher
than 3Vpp.
- 15 -
Loading ...
Loading ...
Loading ...