Masterforce VK800PH Use And Care Manual

Loading ...

Page 15

INSTALLING HEPA FILTER & PRE-FILTER

Installing HEPA Filter & Pre-Filter

1. Verify that the power cord is disconnected

from the outlet (Fig. 1).

Fig. 1

2. Remove power head and place in upside

down position.

3. Install the HEPA filter over the filter cage

with the flat end of the filter towards the

power head. Carefully push filter in until it

stops against the power head (Fig. 2).

Fig. 2

4. Place filter retainer on top of cartridge filter

over the raised lip and tighten down by

turning retainer clockwise. Do not over-

tighten (Fig. 3).

Fig. 3

5. Slide the pre-filter onto the assembled

HEPA filter, over the lower end cap. Tighten

the band clamp on the pre-filter with a

screwdriver to ensure proper installation

(Fig. 4 & 5).

Fig. 4 Fig. 5

Removing HEPA Filter & Pre-Filter

1. Loosen the band clamp on the pre-filter with

a screwdriver, and remove the pre-filter

from the HEPA filter.

2. Unlock and remove the filter retainer by

turning retainer counter clockwise.

3. Carefully hold and pull the HEPA filter up for

removal (Fig. 6).

Fig. 6

4. Install the HEPA filter as instructed above in

steps 2 and 3 of Installing HEPA filter.

5. The foam wet filter should be removed

and allowed to air dry for 24 hours before

installing onto the filter cage.

Loading ...

Masterforce VK800PH 8 Gallon Certified HEPA Wet/Dry Shop Vacuum