Masterforce VK800PH Use And Care Manual

Loading ...

Page 10

DRY VACUUMING

WARNING:

BE SURE TO READ,

UNDERSTAND, AND APPLY INFORMATION,

ENTITLED ‘SAFETY INSTRUCTIONS &

WARNINGS’. DO NOT VACUUM IN AREAS

WITH FLAMMABLE GASES, VAPORS,

OR EXPLOSIVE DUSTS IN THE AIR.

FLAMMABLE GASES OR VAPORS INCLUDE

BUT ARE NOT LIMITED TO: LIGHTER

FLUID, SOLVENT TYPE CLEANERS, OIL-

BASED PAINTS, GASOLINE, ALCOHOL OR

AEROSOL SPRAYS. EXPLOSIVE DUSTS

INCLUDE BUT ARE NOT LIMITED TO: COAL,

MAGNESIUM, GRAIN OR GUN POWDER. TO

REDUCE THE RISK OF HEALTH HAZARDS

FROM VAPORS OR DUST, DO NOT

VACUUM TOXIC MATERIALS.

CAUTION:

NEVER operate the

vacuum cleaner without all of the lters

installed. This includes the HEPA lter, pre-

ler and collection bag. Motor damage, loss

of operating efciency, and recirculation of

hazardous material into the work area will

take place if not installed.

1. Verify that the power cord is disconnected

from the outlet (Fig. 1).

Fig. 1

2. In order to prepare your vacuum for dry

vacuuming, verify that the HEPA filter is

securely mounted. Remove the power head

and place in an upside down position. Make

sure the filter is pushed in firmly against the

power head. Install the flat rubber washer

and retainer. (fig. 2 & 3)

Fig. 2 Fig. 3

3. Slide the pre-filter onto the assembled HEPA

filter. Tighten the band clamp on the pre-

filter with a screwdriver to ensure proper

installation (Fig. 4 & 5). For installation

instructions, see page 15.

Fig. 4 Fig. 5

4. Fit collection bag f lange onto the inlet port,

taking care not to damage the bag (Fig. 6).

Fig. 6

DRY VACUUM OPERATION

Loading ...

Masterforce VK800PH 8 Gallon Certified HEPA Wet/Dry Shop Vacuum

Use And Care Manual - Page 11