Loading ...
Loading ...
Loading ...
Cleaning and maintenance
35
EN
4. Slide out and remove the light bulb.
5. Fit the new light bulb.
6. Refit the cover. Ensure the moulded part
of the glass (A) is facing the door.
7. Press the cover completely down so that
it attaches perfectly to the bulb support.
What to do if...
The appliance does not work.
• The circuit breaker is faulty: look in the
fuse box and check that the circuit
breaker is in working order.
• Power cut: check whether the kitchen
light works.
The gas burner does not ignite.
• Power cut or damp ignition plugs: light
the gas burner with a gas lighter or a
match.
The oven does not heat up.
• Faulty fuse: check and, if required,
replace the circuit breaker.
• The function knob has not been set: set
the function knob.
All dishes that are prepared in the oven
burn within an extremely short period of
time.
• Faulty thermostat: call the Authorised
Assistance Centres.
The door panel steams up when the oven
is hot.
• Normal occurrence caused by the
difference in temperature: this has no
effect on oven performance.
Do not touch the halogen light
bulb directly with your fingers, but
wrap it in insulating material.
If the problem has not been
resolved or in the case of other
types of fault, contact your local
technical support centre.
Annual service by an authorised
person is recommended, or if any
of the following conditions are
noticed:
• Incomplete ignition.
• appreciable yellow tipping.
• carbon deposition.
• lifting.
• floating.
• lighting back.
• objectionable odour.
Loading ...
Loading ...
Loading ...