Loading ...
Loading ...
Loading ...
Moving money forward
®
14
denomination. After your lowest denomination has been counted, record your
information. Then, press the VAL button until 0 (zero) appears. The value mode will
reset, the VAL indicator light will turn off, the tally will clear and a new value count
session can begin.
DETECTION FEATURES
4.
4.1 UV Counterfeit detection
The Cassida 5520 is able to check for counterfeit bills using ultraviolet (UV) light.
This function is available in all modes. Press the UV or UV/MG button until the UV
indicator appears on the LCD screen.
The unit beeps two times and stops counting when a suspect bill is detected and
a UV message ashes on the screen. The unit will continue to alert the user until
action is taken. To continue counting, remove the suspect bill (which will be the
last one in the stacker) and press the START button. The unit will start counting
again and will not add the counterfeit bill to the count.
Please note that 5520, like all other counters with integrated detectors present
on the market, can not guarantee a counted bill to be genuine or counterfeit.
There are several reasons a genuine bill may be recognized as counterfeit or
vice versa. Possible reasons include: direct sunlight exposure, worn out bill,
excessively dirty bill or highly advanced counterfeiting techniques used to
produce the bill. Separate equipment may be required to determine denitively
whether or not a note is counterfeit.
4.2 MG Counterfeit detection (Cassida UV/MG model only)
4.2 MG Counterfeit detection (Cassida UV/MG model only)
The Cassida 5520 UV/MG is able to check for counterfeit bills using magnetic
(MG) ink marks present in all US dollar denominations. This function is available in
all modes. Press the UV/MG button to toggle between UV/MG, OFF and UV and
MG mode. The MG indicator will be on the LCD screen while the MG detector
is enabled.
The unit will start beeping and stop counting when a counterfeit note is detected
and a MG message will be displayed. The unit will continue to alert the user until
action is taken. To continue counting, remove the suspect bill (which will be the last
one in the stacker) and press the START button. The unit will start counting again
and will not add the counterfeit bill to the count.
Loading ...
Loading ...
Loading ...