Loading ...
Loading ...
Loading ...
STEP 1 STEP 2 STEP 3
www.sharkrocket.com
6
1 Plug the unit in and pull it back. 2 Slide the POWER switch to the first position to clean
bare floor surfaces and delicate area rugs. The brush
roll will spin slowly to help with debris pick-up.
3 Slide the POWER switch to the second position to
clean carpets. The brush roll will spin faster to help
pick up debris below the surface.
1 Slip two tabs between the nozzle and the duster base and attach them to the front
fasteners. Then pull the other two tabs tightly around to the back fasteners. Ensure that
the pad is flat against the bottom surface and tightly secured.
2 Slide the POWER switch to the first position and use the Dust-Away
™
Hard Floor
Attachment to clean hard floor surfaces. Do not use to clean damp floors or wet/sticky
messes. Only use pads provided by Shark
®
, which are designed to work with the Dust-
Away
™
Hard Floor Attachment.
MICROFIBER PAD CARE
Machine or hand wash the pads separately in warm water with liquid detergent.
Do not use bleach or fabric softeners as they may damage or leave a coating that will
reduce the cleaning performance of the pads.
Tumble dry low or line dry to extend the life of the microfiber fabric.
For best results, we recommend replacing your microfiber pads every 3 to 4 months.
NOTE: This vacuum does not stand up on its own, so when taking a break, rest it against furniture, on the wall, or lay it flat on the floor.
This vacuum has a 2-speed POWER slider switch, optimized for bare floor, delicate area rug and carpet cleaning.
The floor nozzle has headlights that illuminate the floor surface. The lights turn on in either speed setting.
USING THE MOTORIZED FLOOR NOZZLE
USING THE DUST-AWAY
™
HARD FLOOR ATTACHMENT
Loading ...
Loading ...
Loading ...