Craftsman 917272201 lawn tractor

User Manual - Page 33

For 917272201.

PDF File Manual, 60 pages, Download pdf file

Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART
PROBLEM CAUSE
Loss of power (cont'd) ° Faulty spark plug,
Excessive vibration
Engine continues to
run when operator
leaves seat with at
tachment clutch
'engaged
Poor cut - uneven
Mower blades will not
rotale
Poor grass discharge
Dirty fuel filter.
Stale or dirty fuel.
Water in fue!.
Spark plug wire loose.
Dirty engine air screen/fins.
Dirty/clogged muffler,
,, Loose or damaged wiring,
Carburetor out of adjustment
m
Engine valves out of adjust-
ment.
Worn, bent or loose blade.
Bent blade mandrel.
Loose/damaged part(s)_
, Faulty operator-safety pres-
ence control system
l=
Q
0
0
Worn, bent or loose blade.
Mower deck not level,
Buildup of grass, leaves, and
trash under mower_
Bent blade mandrel
Clogged mower deck vent
holes from buildup of
grass, leaves, and trash
around mandrels.
Obstruction In clutch mecha-
nism.
Worn/damaged mower drive
belt,
Frozen idler pulley,
Frozen blade mandrel.
Engine speed too s_ow.
Travel speed too fast.
Wet grass.
Mower deck not level,
Low/uneven tire air pressure.
CORRECTION
Clean and regap or c'hange _
spark plug.
Replace fuel filter.
. Drain fuel tank and refili with
fresh gasoline.
Drain fuel tank and carburetor,
refill tank with fresh gasoline and
replace fuel filter°
Connect and lighten spark plug
wire.
Clean engine air screentfins.
Clean/replace muffler°
Check all wiring.
See "70 Adjust Carburetor" in
Service and Adjustments
sectton.
Contact an authorized service
center.
Replace blade, Tighten blade
bolt,
Replace blade mandrel
Tighten loose part(s), Replace
damaged parts°
I,mHI,u =
Checl_ wiring, switches and
connections. If not
corrected, contact an autho-
rized service center/
department
Replace blade. Tighten blade
bolt.
Level mower deck.
. Clean underside of mower
housing.
. Replace blade mandrel.
Clean around mandrels to open
vent holes,
Remove obstruction.
Replace mower drive belt.
Replace idler pulley.
, Replace blade mandrel.
Place throttle control in "FAST"
position,
Shift to slower speed,,
Allow grass to dry before mow-
ing
Level mower deck.
Check tires for proper air pres-
sure,
33
Loading ...
Loading ...
Loading ...