Prolux CTX 1526321741923 Prolux Wet/Dry Garage Vacuum, Shampooer, Blower and Detailer

My PDF - Page 9

For 1526321741923.

PDF File Manual, 18 pages, Read Online | Download pdf file

1526321741923 photo
Loading ...
Loading ...
Loading ...
8
Solution:
Empty the dust canister (See “Unit Cleaning” below)
Clean the HEPA filter and cloth filter (See “Unit Cleaning” below)
The right indicator turns yellow when airflow is restricted, which can affect the
“pick up” performance of the unit. Therefore, it is suitable to clean the dust
canister and the filter regularly (every 15 to 30 days).
4. Left red light is the water full indicator. The unit stops sucking up when the
indicator turns red, meanwhile the motor will automatically turn the unit off. To
change simply unplug the unit and empty the water from the dust canister. (See
“Unit Cleaning” below) The unit will start again after replacing the dust canister.
Important:
a. Unplug the unit when the indicator turns yellow and wait at least 5 seconds
before attempting to resume the appliance.
b. Empty the dust canister before vacuuming again. Two copper sensor poles on
the probe should be clean, otherwise the sensing function of the probe will be
affected.
c. After sucking up water, make sure the filters are dry before attempting to
vacuum dust or dirt.
d. When the dust canister is full of water, remove the dust canister by holding the
dust canister handle and rising up by a 10mm distance. Then turn off the hook and
pull the dust canister towards you. Do not attempt this task by one hand and
notice the dust canister cannot be gradient, which can cause the dust canister to
come off easily.
e. If the appliance water exceeds 10L and it doesn’t power off, it means the
appliance has a problem, so immediately power it off. Pour off the water in the
bucket, check the copper pole of the detector and determine whether it’s clean.
Clean the copper pole by taking a bottle of water, open the appliance, and then
submerge the detector with the water. If the appliance is powers off, then the
Probe
Red LED Light:
The LED indicator
will turn on when
water level is too
high
Green LED light:
The LED indicator will turn
on when unit is turned on
Loading ...
Loading ...
Loading ...