Loading ...
Loading ...
Loading ...
9
problem was because the copper pole was dirty and choked. The appliance
should now be ok. If not, there are other problems and it should be sent to repair.
(See picture A)
Vacuuming Liquids:
a. After vacuuming liquids, keep the appliance running up to 3 minutes. Also,
keep tubes on to eliminate any liquid spills.
b. If the filter has water in it and it flows to the motor, cut off the power
immediately. Please contact a technician.
Blower Mode:
This appliance also functions as a blower, sprayer, and shampooer. Attach to the
blower hose to the outlet by inserting the gap in the tube plug to the hook of the
exhaust and turn 90 degrees. See picture ‘A’ below. Attach extension wand, if
desired, to end of hose by pushing it firmly into the hose. Attach additional wand
or tool, if desired, by firmly inserting onto the wand. Start the appliance and begin
blowing. Plug in the unit and push the power switch up to begin blowing.
Tip:
To increase output, use the thumb or/and index finger to press on the one or two
holes on the tube.
Note:
Do not exceed 3 minutes with this process.
Safety device:
1) The appliance has a protection device to automatically power off when the
water is full. It prevents water from reaching the motor. If this happens, the red
light will turn on indicating the tank needs immediate emptying.
A
Loading ...
Loading ...
Loading ...