Loading ...
Loading ...
Loading ...
14
Filter Maintenance:
From ordinary use the HEPA should be replaced once every year or when
yellow light comes on (and dirt bin is clean). Replacing the HEPA filter
does improve suction performance.
Cleaning clogs:
Low suction or poor pickup may be due to a clog in the vacuum. If this occurs, the
LED full dirt tank indicator light will turn yellow and indicate airflow is restricted.
If there is no suction or if suction is reduced at the hose, follow these steps to
clear the clog:
1. Unplug vacuum from electrical outlet.
2. Check the filter and clean as necessary (see unit cleaning above).
3. Check to see if dirt tank is full. Empty if needed.
4. Check wet/dry or blower outlet for clogs.
If the clog is contained near the top of the hose (close to the unit), follow these
steps:
1. Attach hose to the wet/dry inlet and turn the power on.
2. This should dislodge the clog by sucking in debris.
If the clog is contained near the bottom of the hose (close to where tools are
attached), follow these steps:
1. Remove wand or tool.
2. Attach hose to the blower outlet and turn the power on.
3. This should dislodge the clog by blowing out debris.
If the above methods are not successful, find the clog by hand, then squeeze the
hose and shake until the debris dislodges.
F: Wash the HEPA filter and cloth filter.
G: Clean the two copper
poles of the probe
Loading ...
Loading ...
Loading ...