Loading ...
Loading ...
Loading ...
6
Mounting on concrete wall (fasteners included)
You will need: (4) 3/8” x 2-1/4” concrete sleeve anchors.
1. Drill a 3/8” x 1-3/4” hole with a masonry drill bit.
2. Insert a bolt and anchor sleeve into the hole.
3. Align the bracket over the hole and mark the remaining hole locations using the
(4) holes of the mounting bracket. Remove the bracket and drill remaining holes.
4. Mount the bracket starting at top corner hole, tightly securing sleeve anchor with
hex nut.
5. Repeat for three remaining holes.
6. Mount the unit by making sure the two square slots on backside of unit are
sitting on the two hooks on the mounting bracket.
Mounting the Hose Holder (fasteners included)
1. Determine desired location for hose holder
and screw 1-1/4” screw into stud.
(If mounting into drywall with no stud
available, use supplied drywall anchors.)
2. Hang holder from screw and insert 2-1/2”
screw in bottom hole of hose holder to finish
mounting.
3. Wrap hose around holder.
4
holes
Loading ...
Loading ...
Loading ...