Loading ...
Loading ...
Loading ...
888 User Guide
30
Function Action
Auto Mixer On/Off Toggles the Auto Mixer on/off.
Bus Mode Bus Masters.
Channel Groups Edit Create/Edit channel groups.
Channel Sends on Faders Shortcut to put Bus sends on linear faders/toggle on/off.
Channel Source Edit Patch input to channel.
Circle Take Circle take.
Com Activates Com Send.
Com Rtn Activates Com Rtn.
Dante Out Edit Shortcut to Dante Output Routing screen.
EQ Mode Spills EQ parameters over scribble strips, Fader Bank right to view last parameter.
Push and hold V-Pot 1 to toggle EQ on/off, push each band’s amplitude V-Pot to toggle
on/off each band, push each band’s Q V-Pot to toggle eq type Shelf/Peak.
False Take Activates False Take function.
Fat Ch. Mode Spills fat channel parameters across scribble strips.
Fav HP Preset Recalls Fav HP Preset from Main Menu>Outputs>HP Presets.
Fav Toggle Emulates Fav toggle on 888.
Home Activates Home screen and Trim knobs mode.
HP Presets Menu Shortcut to Main Menu>Outputs>HP Presets.
Jog is HP Switches Jog wheel to emulate HP knob on the 888.
Jog is Select Switches Jog wheel to emulate Select knob on the 888.
Jog Wheel Press Acts as “Select” while using jog wheel.
L-ident Indenties left channel output by varying amplitude vs. right channel with constant amplitude.
LR Returns Meter Activates the returns meter view.
Menu Emulates the Menu button on the 888.
Meters Emulates the Meter button on the 888.
Mic Toggle Emulates the Mic toggle on the 888.
Mix Pan Mode Activates all V-Pots to Pan mode on every channel. Push to center pan.
Mix Trim Mode Activates all V-Pots to Trim mode on every channel. Push to enter pan mode.
Nav Down Moves the highlighted selection up one in matrix screens, emulates HP knob down in Home screen.
Nav Left Navigates back to previous screen.
Nav Right Selects the currently highlighted selection.
SUPPORTED THIRD-PARTY CONTROLLERS
The 888 supports some third-party external controllers that conform
to the MCU protocol. Two controllers may be connected simultaneous-
ly for extended control. The CL-12 Linear Fader Controller cannot be
used with another control surface.
ICON PLATFORM M+ AND D2 DISPLAY Eight channel fader bank
with control over gain, bus, sends, coms, trim and pan. Dedicated
Select, Mute, Solo and Arm buttons for each channel. Bank switch to
access 888 channels 1-16 in blocks of 8 banks.
ICON PLATFORM X+ Eight channel expansion fader bank with
single assignable knob and Select, Mute, Solo and Arm buttons.
ICON PLATFORM B+ Assignable illuminated 50 pad button surface.
BEHRINGER X-TOUCH Eight channel trim and fader panel with
master volume and additional mappable buttons. Bank switch to
access 888 channels 1-16 in blocks of 8 banks.
MACKIE MCU PRO Eight channel trim and fader panel with master
volume and additional mappable buttons. Bank switch to access 888
channels 1-16 in blocks of 8 banks.
In addition, any MCU controller may be custom-mapped to perform
any of the following actions on the 888:
Loading ...
Loading ...
Loading ...