Sound Devices 888 16-Channel / 20-Track Multitrack Field Recorder

User Guide - Page 21

For 888.

PDF File Manual, 51 pages, Read Online | Download pdf file

888 photo
Loading ...
Loading ...
Loading ...
888 User Guide
19
Automixer
Selects the Automixing mode and the channels included in the auto-
mixer group(s).
MODE Selects the Mode of Automix [MixAssist, Dugan Automixer]
and whether it is disabled* or enabled.
Tip:
Set a toggle shortcut or mapped controller button to enable/dis-
able the selected automixer mode to allow you to quickly compare the
effect of the automixer being on or off.
RING LED INDICATION Set to On to display automix meter levels on
the ring LEDs. Set to Off if you prefer to only see automix levels in the
LCD meter views only.
CHANNEL SELECTION Selects which of channels 1-16 are included
into the automix group(s).
Note: Automixer is only available with sample rates of 47952, 48000,
and 48048 Hz.
DUGAN AUTOMIXER MODE
Dugan gain display bars are overlaid on top of the channel signal
meters. The top 15 dB of the meter scale is shared between Dugan
gain display bars and audio signal metering. Dugan gain display bars
range from 0 dB (at the top, aligned with 0 dBFS, no attenuation) to
-15 dB (max attenuation). The -15 dB value is indicated by a purple
horizontal graticule mark to the left of a channel’s signal meter when
that channel is enabled for Dugan in Menu>Automixer.
There are two independent Dugan processing groups, Bus L and Bus
R. Channels 1-16 can be routed to Bus L, Bus R, both equally (Center),
or both unequally (L or R pan increments) by using a channel’s pan
control.
To show which Dugan group the channel is in, the Dugan gain display
bar is left-aligned for fully L, right-aligned for fully R and center-aligned
for any other pan value. When a channel is routed to both Dugan
groups (Bus L and R), the center-aligned gain display bar shows the
least attenuated value.
The Channel Screen shows the Dugan gain display bar overlaid within
the horizontal channel meter. The Dugan gain display scale and indi-
cation is the same as in the main meter screen.
The ring LEDs for ch 1-8 show Dugan gain for ch 1-8. The ring LEDs
begin to glow purple at 15 dB attenuation and increase in intensity at
0 dB attenuation.
Loading ...
Loading ...
Loading ...