Loading ...
Loading ...
Loading ...
12
4.2 Warning notices on device
Attention
Danger due to hot surface! There is a warning notice referring to dangers due to
hot surfaces located on the device. The surfaces of the device can become
extremely hot.
► Do not touch the hot surfaces of the device. Danger of burns!
► Do not set or lay any items on the device.
5 Operation and Handing
This chapter provides you with important notices with regard to operating the device. Observe
the following notices to avoid dangers and damages:
Warning
► Do not leave the device unsupervised during operation to be able to react quickly in case of
dangers.
Please note
► The crumb tray has always to be placed in the bottom of the device. It is also an additional
heat protection for the surface on which the device is placed.
5.1 Before using the appliance the first time
1. Remove all packaging materials and any transport safety devices.
2. Confirm that all accessories mentioned have been supplied.
3. Clean the toaster with a damp cloth.
4. Confirm that all components are properly assembled and the appliance is placed firmly.
5. Make sure that there is enough space between the toaster and the wall or other appliances,
as the toaster will become hot during operation.
6. Connect the appliance to the mains supply by means of the lead cable (120V,60 Hz).
7. Before using the toaster for the first time, you will have to perform a toasting process without
bread. Press the toast lever down until it latches into place.
8. When the toasting is finished, the toast lever automatically jumps up. You may now start
toasting bread.
5.2 Operation - Toasting
1. Prepare the toaster as described in chapter “Before first use”.
2. Put the slices of bread into the slots of toast chamber.
3. Select the desired toasting grade using the roasting grade selector. The adjustment is
continuous, corresponding level 1 to light toasting and level 6 to dark toasting. The toast will
Loading ...
Loading ...
Loading ...